View source for MagnetGuard V2 - The Sensor

== The sensor ==
[[File:Magnetguard v2 sensor 1.png|600px|center|Sensor]]
To '''turn on''' the sensor insert the battery (Figure 3). Both LED’s 1 and 2 will show by blinking pattern correspondent to current settings, first for sensitivity (LED2) and than for criteria (LED 1) (see chapter 6). Finally the sensor will send information: „Iam on”, „Battery status” and „Test alarm” to the central unit (if they were previously connected together). After that the sensor goes in active mode and is ready to work.<br>