Combie-Shop PCB description - Revision history

Baya: /* The overall dimensions */

2017-04-11T07:44:06Z

‎The overall dimensions

Baya at 07:42, 11 April 2017

2017-04-11T07:42:02Z

Baya: Created page with "Figure 1: A general view of the management board, on which connectors for external connections are indicated ===The purpose of..."

2017-04-11T07:41:48Z

Created page with "Figure 1: A general view of the management board, on which connectors for external connections are indicated ===The purpose of..."

New page

[[File:Combie manual board 11.png|frame|none|Figure 1: A general view of the management board, on which connectors for external connections are indicated]]

===The purpose of the connectors is as follows===
* '''CON 1''' - power connection 12..24 VDC / VAC
* '''CON 2''' - connection of an electromagnetic loudspeaker (speaker) 4 - 8 Ohm, or a sound amplifier
* '''CON 3''' - connection of LED indication and / or buzzer. The pin assignments are shown in Table. 1
* '''CON 5''' - connection of a loop from magnets sensors
* '''CON 6, 7''' - connection of distance sensors for detection of prohibited passes and visitor counting (WWE - wrong way exit, PC - pass counter)
* '''LED mode''' - LED for indicating the operating modes of the system
* '''LED error''' - LED for indicating errors and system faults
* '''Connect button''' - the button for entering the mode of setting up [[WiFi Setup|a connection to the Wi-Fi network]]

===Table 1. Pin assignment of the connector of the display CON 3===
{|border=1 cellpadding=5
|-
|Pin 1||+12 V
|-
|Pin 2||Magnet with trolley (RED)
|-
|Pin 3||Magnet (GREEN)
|-
|Pin 4||Metal (BLUE)
|-
|Pin 5||WWE Left
|-
|Pin 6||WWE Right
|}

== The overall dimensions ==
Figure 2 shows the overall dimensions of the board with attached connectors presented. And also the size and center-to-center distance of mounting holes on the board.
[[File:Combie manual size 13.png|frame|none|Fig. 2: Combie-Shop PCB dimensions]]

← Older revision		Revision as of 07:42, 11 April 2017
Line 30:		Line 30:
	Figure 2 shows the overall dimensions of the board with attached connectors presented. And also the size and center-to-center distance of mounting holes on the board.		Figure 2 shows the overall dimensions of the board with attached connectors presented. And also the size and center-to-center distance of mounting holes on the board.
	[[File:Combie manual size 13.png\|frame\|none\|Fig. 2: Combie-Shop PCB dimensions]]		[[File:Combie manual size 13.png\|frame\|none\|Fig. 2: Combie-Shop PCB dimensions]]
		+
		+	[[Category:Combie-Shop]]

@@ Line 29: / Line 29: @@
 == The overall dimensions ==
 Figure 2 shows the overall dimensions of the board with attached connectors presented. And also the size and center-to-center distance of mounting holes on the board.
-[[File:Combie manual size 13.png|frame|none|Fig. 2: Combie-Shop PCB dimensions]]
+[[File:Combie manual size 13.png|frame|none|Fig. 2: Dimensions of the Combie-Shop board with connectors]]
 [[Category:Combie-Shop]]