Difference between revisions of "Combie-Shop PCB description"
From Awesome Baozam
(Created page with "Figure 1: A general view of the management board, on which connectors for external connections are indicated ===The purpose of...") |
(→The overall dimensions) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 29: | Line 29: | ||
== The overall dimensions == | == The overall dimensions == | ||
Figure 2 shows the overall dimensions of the board with attached connectors presented. And also the size and center-to-center distance of mounting holes on the board. | Figure 2 shows the overall dimensions of the board with attached connectors presented. And also the size and center-to-center distance of mounting holes on the board. | ||
| − | [[File:Combie manual size 13.png|frame|none|Fig. 2: Combie-Shop | + | [[File:Combie manual size 13.png|frame|none|Fig. 2: Dimensions of the Combie-Shop board with connectors]] |
| + | |||
| + | [[Category:Combie-Shop]] | ||
Latest revision as of 09:44, 11 April 2017
Figure 1: A general view of the management board, on which connectors for external connections are indicated
The purpose of the connectors is as follows
- CON 1 - power connection 12..24 VDC / VAC
- CON 2 - connection of an electromagnetic loudspeaker (speaker) 4 - 8 Ohm, or a sound amplifier
- CON 3 - connection of LED indication and / or buzzer. The pin assignments are shown in Table. 1
- CON 5 - connection of a loop from magnets sensors
- CON 6, 7 - connection of distance sensors for detection of prohibited passes and visitor counting (WWE - wrong way exit, PC - pass counter)
- LED mode - LED for indicating the operating modes of the system
- LED error - LED for indicating errors and system faults
- Connect button - the button for entering the mode of setting up a connection to the Wi-Fi network
Table 1. Pin assignment of the connector of the display CON 3
| Pin 1 | +12 V |
| Pin 2 | Magnet with trolley (RED) |
| Pin 3 | Magnet (GREEN) |
| Pin 4 | Metal (BLUE) |
| Pin 5 | WWE Left |
| Pin 6 | WWE Right |
The overall dimensions
Figure 2 shows the overall dimensions of the board with attached connectors presented. And also the size and center-to-center distance of mounting holes on the board.
Fig. 2: Dimensions of the Combie-Shop board with connectors
