MagnetGuard V2 - The Sensor
From Awesome Baozam
Revision as of 16:07, 24 November 2018 by Monster (Talk | contribs) (Created page with "== The sensor == Sensor To '''turn on''' the sensor insert the battery (Figure 3). Both LED’s 1 and 2 will show by blinking...")
The sensor
To turn on the sensor insert the battery (Figure 3). Both LED’s 1 and 2 will show by blinking pattern correspondent to current settings, first for sensitivity (LED2) and than for criteria (LED 1) (see chapter 6). Finally the sensor will send information: „Iam on”, „Battery status” and „Test alarm” to the central unit (if they were previously connected together). After that the sensor goes in active mode and is ready to work.
