Iridium mono 2k IR 1040 06 V4 - Setting the parameters
From Awesome Baozam
Revision as of 15:15, 24 November 2018 by Monster (Talk | contribs) (Created page with "== Setting the parameters == The following parameters can be set on the electronics: {|border=1 cellpadding=5 |- | 1 || NodE || Mode || (Mode of operation) |- | 2 || trNo || T...")
Setting the parameters
The following parameters can be set on the electronics:
1 | NodE | Mode | (Mode of operation) |
2 | trNo | Transmitting mode | (Transmitting mode) |
3 | rESP | Response | (Response) |
4 | SEnS | Sensitivity | (Sensitivity) |
5 | tAGS | Tags | (Tags) |
6 | GAIn | Gain | (Gain of the channels) |
7 | NAG1 | Manual Gain 1 | (Manual gain value - channel 1) |
8 | NAG2 | Manual Gain 2 | (Manual gain value - channel 2) |
9 | PoUt | Power Out | (Transmitting power) |
10 | dENo | Delay Mode | (Mode of delay setting) |
11 | SLS4 | Slave Sync | (Slave mode synchronization mode) |
12 | L t1 | Light time | (Alarm light time) |
13 | S t1 | Sound time | (Alarm sound time) |
14 | S rP | Sound repeat | (Alarm sound frequency) |
15 | S uL | Sound volume | (Alarm sound volume) |
16 | r t1 | Relay time | (Alarm time on RELAY terminals) |
17 | AduE | Advertisement | (Advertisement light) |
18 | InFr | Internal Frequency | (Transmission frequency) |
19 | dEL4 | Delay value | (Transmission delay value) |