Iridium mono 2k IR 1040 06 V4 - Electronic board

Electronic board IRD 1040 06 including the plug-in mechanism

Plug-in mechanism

Electronic board is fixed in the plug-in mechanism. This solution enables very simple and easy replacement. Just push the plastic lever to the right, which fixes the position of the electronic board and then push the board up from the 20-pin connector. That’s all.
To plug the board back in just simply slide an electronic board back to the 20-pin connector.

Detection distance for channel 1 & 2

Electronic board Mono 2k allows signal reception from 2 receiving antennas (single & double „8“ loop) located inside the same frame. Single „8“ loop is connected to pins 17 – 18 and double „8“ loop to pins 15 – 16.

The shape of the tag detection tree depends on the geometrical configuration of the “8” loops (single-8 & double-8). That means the location of horizontal bar.
The difference between a 1-bar and a 3-bar mono system