MagnetGuard V2 - Sensor Adjustment

Sensor Adjustment

Sensitivity adjustment

Sensor sensitivity provides the ability to choose the level of sensor response to magnetic field changes. It let us obtain the required detection range free of false alarms.
Sensor sensitivity adjustment process is performed by consecutive pressing the button 2 «Sens» to choose the required sensitivity level. LED1 will be activated and LED 2 will make number of blinks which corresponds with the selected sensitivity level (refer to the table, default setting is highlighted).
Sensitivity settings of the sensor:

LED2 flashes	Approx. magnetic field changes threshold, nТl	Sensitivity level
1	380	Very high
2	450	High
3	500	High (default)
4	630	High to intermediate
5	900	Intermediate
6	1000	Intermediate
7	1200	Intermediate
8	1400	Intermediate to low
9	1600	Low
10	1800	Low

Criteria adjustment

Criteria adjustment let us maintain the time needed for magnetic field changes to be recognised as a detacher. This allows to eliminate false alarms caused by phones, bags with magnet locks or magnetic random noise (high current commutation) which occur mostly for a very short period of time.
Criteria adjustment process is performed by consecutive pressing on the button 1 «Criteria» to choose the criteria settings number. LED2 will be activated and LED 1 will make number of blinks which corresponds with the selected criteria level (refer to the table, default setting is highlighted).
Criteria settings of the sensor:

LED1 flashes	Approx. min. detection time / max. filter time, sec	Criteria level
1	0,02/0,2	No filtering
2	0,2/0,6	Very high
3	0,4/1,2	High (default)
4	0,6/1,5	High to intermediate
5	0,9/1,9	Intermediate
6	1,1/2,3	Intermediate
7	1,3/2,7	Intermediate
8	1,5/3,1	Intermediate to low
9	1,7/3,5	Low
10	1,9/3,9	Low