Difference between revisions of "Magnet detector"
From Awesome Baozam
(→How to setup MD centrals in repeating mode) |
m (→Specifications) |
||
| Line 2: | Line 2: | ||
== Specifications == | == Specifications == | ||
| − | |||
| − | |||
| − | |||
===MagnetGuard® Wireless sensor=== | ===MagnetGuard® Wireless sensor=== | ||
| + | {|border=1 cellpadding=5 | ||
|- | |- | ||
|Power supply ||Lithium cell AA ER14505 (3.6V 2.4Ah) | |Power supply ||Lithium cell AA ER14505 (3.6V 2.4Ah) | ||
Revision as of 16:26, 28 February 2017
MagnetGuard® Wireless is designed for installation in shop entrances , passages and in fitting rooms to detect and alert personnel about the presence of powerful permanent magnets. Powerful magnets can be used for unauthorized removal of security sensors from the goods. The system consists of wireless magnetic sensors and wireless alarming devices for the personnel. The sensors are battery-powered and designed for optimal power consumption modes resulting in one to three years of battery life, depending on selected operating mode. Easy and transparent system installation and configuration for end users with "one-touch" deployment.
Specifications
MagnetGuard® Wireless sensor
| Power supply | Lithium cell AA ER14505 (3.6V 2.4Ah) |
| Dimensions | 80mm x 40mm x 20mm ( L x W x H ) |
| Color | Gray, Black |
| Mounting | Using double-sided adhesive tape, |
| Detacher detection distance* | Up to 1.5m in all directions |
| Controls | 2 buttons inside («connect/reset» and «mode») |
| RF band | 2.4GHz |
| Radio transmission distance** | Up to 50m (in open field) |
| Communication protocol | IEEE 802.15.4 compatible |
| Number of supported alarming devices | Up to 10 alarming devices |
- *The detection distance depends on the magnetic properties and construction of magnetic detacher and sensitivity settings.
- **The transmission distance depends on many factors ( the presence of the shielding structures, the mutual orientation of the devices, etc. )
