MagnetGuard V2 - Installation procedure
From Awesome Baozam
Revision as of 16:56, 24 November 2018 by Monster (Talk | contribs) (Created page with "== Installation procedure == :- please refer to ( general installation issues ) for choosing proper installation location fo...")
Installation procedure
- - please refer to ( general installation issues ) for choosing proper installation location for sensors and central unit
- - reset the central unit and the sensors
- - connect your central unit with required number of sensors ( see initial configuration of the system )
- - temporary fix the sensors in current location for testing
- - provide the testing of required magnet detection range
- - if necessary provide sensor tuning as described in sensor adjustment: "Sensitivity adjustment" and "Criteria adjustment"
- - temporary fix the central unit in proper location and test messages transmitting range
- - fix sensors and central unit stationary and provide final testing of magnet detection
- - system is ready to use.
