MagnetGuard V2 - The Central Unit

The central unit

The central unit (see figure) can be paired wireless with up to ten sensors and informs us with light and/or sound alarms about detacher/magnet detection. The red indicator LED’s from 1 to 10 let us recognise which sensor detects a magnet at the moment. The obligatory light alarm can be combined with an additional sound alarm. To select the required sound alarm press the „Mode” button. The new setting will automatically be stored. Sound alarm options:

- continuous beeping, duration 5 seconds

- short beeps for 5 seconds period of time

- no sound alarm (only light alarm)

Additionally the central unit will also show us battery status of connected sensors in case of low battery voltage (see table below).

LED status	Operating mode	Description
Switched off	Normal	No magnet/detacher detected
10 sec lighting up	Alarm	Magnet/detacher detected
30 sec blinking every hour	Battery warning	Low battery, please replace the battery